NEW Trend 35mm Concealed Hinge Jig for Cabinets

  • 1. Install a 35mm hole opener, adjust the drilling depth to 12-13MM normally, and then lock the limit ring.
  • 2. Adjust the fixed size of quick clamping black pressing block (Note: the tool can adjust the fixed board size to 15-25mm)
  • 3. Move the puncher to the position of scribing and punching on the board, and lock the quick clip.
  • 4. The electric drill shall tighten the handle of the hole opener, press down the hole to 12-13MM depth at a uniform speed, and then drill 2mm screw holes on the left and right sides.
  • 5. The distance from 35mm hole to edge is 5mm, which is suitable for most common hinges.
  • 6. Install 35mm hing


  • Material: aluminium alloy
  • Hole open depth: 10-15mm
  • Clamping thickness: 15-25mm
  • Hole position margin adjust ranges: 3-7mm
  • Package size: 170 * 105 * 90mm / 6.7 * 4.1 * 3.5in
  • Package weight: 700g / 1.5lb